View previous topic :: View next topic |
Author |
Message |
Pike1950
Joined: 23 Jun 2019 Posts: 2 Location:
|
Posted: Sun Jun 23, 2019 3:35 pm Post subject: Deco remy 727S starter |
|
|
I need to test my starter before trying to bring my old straight eight to life. I tried to have O'Reilly and Autozone test it but their machines don't go back that far. I would really like to rebuild it if I can find the correct parts. Any help would be appreciated. Thank, AJ _________________ |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Larry Site Admin
![](images/avatars/980863097447eed2cb09ef.jpg)
Joined: 01 Jun 2006 Posts: 4772
|
Posted: Sun Jun 23, 2019 8:55 pm Post subject: Early Starter |
|
|
Those old starters are pretty bulletproof. Have you hooked it up to a battery yet? Even a 12 volt will be OK for a quick test. Negative to the case and touch the big battery lead on the solenoid with the positive. If it doesn't click the solenoid, that can be taken apart and the contacts cleaned with sand paper.
Rebuilding, even if working, is a good idea. I'm sure Kurt Kelsey Pontiac Parts will have everything you need, or certainly a place like Kanter's will. Also try Northwestern Auto Parts in Grand Rapids, Michigan (http://northwesternautosupply.com/). Also CPR- see ad to the right should have all you need.
If you have an electrical motor repair shop nearby they can also do things like check the windings and probably clean the commutator. If not, the commutator can be dressed with some fine sand paper and the grooves cleaned with a sharp object. _________________ PontiacRegistry.com... building the single largest source of Pontiac information, services, and entertainment in the world! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Pike1950
Joined: 23 Jun 2019 Posts: 2 Location:
|
Posted: Mon Jun 24, 2019 9:01 pm Post subject: |
|
|
Thank you very much for the info. We pulled it apart today and found the brushes looked good, we cleaned the armature and a couple of the springs were broken. I think we found parts for that but need the selanoid. I will research the sources you suggested. Thanks, I'm sure I'll need your help again before I get this old 8 running again. _________________ |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Larry Site Admin
![](images/avatars/980863097447eed2cb09ef.jpg)
Joined: 01 Jun 2006 Posts: 4772
|
Posted: Tue Jun 25, 2019 10:58 am Post subject: Starter Repairs |
|
|
You didn't mention what year your Pontiac was, but check the attached pdf file. It is from the 1949-54 Pontiac Shop Manual. _________________ PontiacRegistry.com... building the single largest source of Pontiac information, services, and entertainment in the world! |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
|
|