View previous topic :: View next topic |
Author |
Message |
super
Joined: 08 Aug 2006 Posts: 643 Location: Sullivan, Missouri
1974 Super Duty TransAm
|
Posted: Wed Jun 13, 2007 2:24 pm Post subject: Naturally Aspirated Pontiac |
|
|
Does anyone know what the quickest and fastest naturally aspirated traditional Pontiac is? Doorslammer.
I am sure there are plently that claim to be. Wonder what it is. |
|
Back to top |
|
|
johnta1
Joined: 21 Sep 2006 Posts: 25
1973 TransAm
|
Posted: Tue Jun 19, 2007 8:59 pm Post subject: |
|
|
Scott Rex runs 7.90's at least in the 1/4 with a 4th gen Firebird. _________________ http://www.wallaceracing.com/
Pontiac Power RULES !!! |
|
Back to top |
|
|
super
Joined: 08 Aug 2006 Posts: 643 Location: Sullivan, Missouri
1974 Super Duty TransAm
|
Posted: Fri Jun 29, 2007 9:28 pm Post subject: |
|
|
What cubic inches and combination does he run in his Firebird? 7.90's is movin'!! |
|
Back to top |
|
|
johnta1
Joined: 21 Sep 2006 Posts: 25
1973 TransAm
|
Posted: Fri Jun 29, 2007 10:21 pm Post subject: |
|
|
He has gotten it down to 7.44 @ 186 now.
IA2 block, Tiger heads, sheetmetal with two dominators, 540 CID maybe? _________________ http://www.wallaceracing.com/
Pontiac Power RULES !!! |
|
Back to top |
|
|
super
Joined: 08 Aug 2006 Posts: 643 Location: Sullivan, Missouri
1974 Super Duty TransAm
|
Posted: Mon Jul 02, 2007 10:24 pm Post subject: |
|
|
Wonder what the quickest traditional Pontiac block and cylinder head doorslammer is? |
|
Back to top |
|
|
johnta1
Joined: 21 Sep 2006 Posts: 25
1973 TransAm
|
Posted: Tue Jul 03, 2007 4:05 pm Post subject: |
|
|
Not for sure.
Most fast guys anymore use aluminum heads.
There are a few who have gone low 9's with cast iron parts. _________________ http://www.wallaceracing.com/
Pontiac Power RULES !!! |
|
Back to top |
|
|
super
Joined: 08 Aug 2006 Posts: 643 Location: Sullivan, Missouri
1974 Super Duty TransAm
|
Posted: Tue Jul 03, 2007 11:14 pm Post subject: |
|
|
We have dipped in the high 9's with factory parts in both our 1965 Tempest and 1963 Tempest. We ran a 428 with 7F6 H.O. heads in the '65 and ran in the 9's very consistently. No radical parts either. It killed the chevy guys.
Most cars seem to run either the Edelbrock aluminum heads or Wenzler heads from what I have seen too. The Norwalk event will probably bring out the top guns as always.
Thanks,
Jeff |
|
Back to top |
|
|
|